10 thoughts on “Contact

  • August 3, 2016 at 8:42 PM
    Permalink

    I was watching your shop youtube video. Thank you for that. I was wondering if yiu could give me some advice since your more advanced than me. I’ve done woodworking for awhile but I’m ot very good. I only have basic tools like drills, circular saw, jigsaw, sawzaw, and chop saw. I recently completed a big remodel at our home and built a 24×36 shop…..I’m struggling on how to even start. I know I want more tools like sliding miter, table saw, router etc but don’t have it. I’ve been thinking of just building some 2×4 shelves and just set everything on those shelves until I can start building things like a assembly table, painter/finisher tables etc….any ideas on how to even start a shop that’s empty and you c don’t have all your tools yet? Everything I see everyone already has all their stuff. Right now my number one purchase is a rigid table saw. Looks to be a good and somewhat affordable saw plus it’s on wheels to being to the porch or move around….other than that I’m not sure other than the Dewalt planer which Is a little pricey for my budget right now….aby advice would be awesome.
    Marcus
    Steelwoodunion
    http://www.steelwoodunion.com

    Reply
    • August 6, 2016 at 12:05 AM
      Permalink

      Hey Marcus, sounds like you got a nice size shop! I would probably start by building an out feed table for the table saw. You know that you’re going to need one and it will also give a good work surface to build things off of to start. Then just go one thing at a time, just sorta build what you need as you need. The most important part is having fun doing it, setting up shop is a lot of fun and it will come together quickly as long as you get out there and start building!!

      Reply
  • August 23, 2016 at 5:06 PM
    Permalink

    Hey Matt! I have a friend that needs to take down two large cherry trees and it occurred to me that since you live relatively close, you may be interested in some of the wood too. I’ve recently gotten into milling and processing my own lumber, but there is no way I’m going to be able to take all of it.
    If you think you might be interested in some of it, please contact me and I can fill you in on the details.
    David

    Reply
    • August 23, 2016 at 5:19 PM
      Permalink

      That would be awesome man, just let me know when!

      Reply
  • November 7, 2016 at 8:32 PM
    Permalink

    Hi mat awesome job like it. can you give some advise i’m building some kitchen cabinets using hard maple i’m looing to have a beautiful paint job. how can i obtain a smoothe finish like yours with out using automotive paint what paint will you recomend and how shall i prepare work piece i’m not so goog at painting.oh the pieces has to be spray in the house. Thank you .i’ll be greatfull for your advice.Rawle

    Reply
    • November 19, 2016 at 6:20 PM
      Permalink

      Are you spraying these with color or clear coat?

      Reply
  • November 13, 2016 at 1:26 AM
    Permalink

    Hey Matt,

    I just noticed you subscribed to my channel and so I figured it would be a perfect time to reach out, say Hi and get to know you. I recall that you are a Autobody painter for your day job is that right?

    Reply
    • November 19, 2016 at 6:20 PM
      Permalink

      Hey man, yep i’m an auto body painter.

      Reply
  • December 7, 2016 at 8:44 PM
    Permalink

    matt in the video of the fish tank stand is that a laqer(pardon spelling please) paint spraying

    Reply
  • January 5, 2017 at 4:46 PM
    Permalink

    “How To Make A Bar Clamp Rack ” —– rough countersink hole, Your using a metal cutting countersink bit.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *